Not our ordinary RV travel day

The day before our scheduled departure from our winter RV location, we still hadn’t put the fifth-wheel hitch in the bed of the truck or topped off our propane tanks. Nor had we done any packing to speak of — although we had fixed some upholstery issues, defrosted our freezer, cleaned our ceiling fan, and lightened our load by getting rid of some rarely used items.

We didn’t feel ready to travel. But the mobile home/RV park we were at had a strict 179-day maximum RV stay. This led to a very unordinary RV travel day.

Preparing to hit the road

Due to local responsibilities we wanted to complete, including helping our son finish a drywall project and tying off loose ends at the Commemorative Air Force, we decided to stay close. With high temperatures in the forecast, we knew we’d need an electric hookup, but all of the campgrounds in the area were booked, as it was still prime snowbird season. 

Thankfully, our friends Peter and Janice graciously offered to let us moochdock on their property, 5 miles away — our shortest point-to-point distance ever.

The morning of our departure, Bob busied himself with inflating the six tires on Gulliver and the four on Tagalong while I worked on preparing the inside of the trailer for travel. That meant clearing areas to allow the slideouts to come into the rig and securing any loose items for the impending earthquake that would rattle all of our belongings. 

I was most excited about the prospect of seeing our table again. It had become a dumping ground for things that needed our attention or we didn’t know what to do with. 

Normally, I would have started packing the night before to make for a smooth and relatively quick trailer closing so that we could connect it to the truck and get on the road. Our brief travel distance eased our pressure, giving us time to make sure we did everything properly — an important aspect after getting out of the habit. 

Four hours later, after taking care of a number of other tasks, including resealing the rig’s underbelly, we dusted off our checklists to ensure we wouldn’t forget any steps when closing Tagalong’s slideouts and connecting the truck to the trailer.

Finding a way in

Getting situated at Peter and Janice’s required backing in a long distance. But first, we had to turn around to get into position to go in reverse. We had two options: 

1. Make a Y turnaround 
2. Drive around the neighbor’s property to get into position 

We attempted the first option, which meant backing down a hill to turn the trailer around. It started off well. Then CLUNK! Bob thought he hit a gate. I assured him he wasn’t close to the gate, and we wrote off the sound as “normal” truck and trailer noises while moving. 

We were wrong and learned a very important lesson: If the truck and trailer aren’t mostly level, we shouldn’t attempt a 90-degree turn. Trying to make that maneuver on an incline caused the fifth-wheel pin box to hit the edge of the truck bed, bending the frame that holds our tonneau cover. Oops!

On to the second option. Bob backed up the trailer farther to get into position to drive around the neighbor’s U-shaped drive. As he pulled onto the neighbor’s property, he caught the flank of the trailer on a rebar post, ripping the side camera off Tagalong. We didn’t use the side cameras much anyway, so we didn’t think it a big deal. 

If at first you don’t succeed

After backing up again and re-entering the property, we had no issues. Bob drove the trailer around the drive and got it into position for the lengthy backup procedure, which involved avoiding large rocks, making a turn, and staying out of a pit. It proved a great way to get re-initiated to trailering for our travel season.

The process went slow but successfully. Bob avoided all the obstacles and parked the trailer. We disconnected and leveled it and started setting up. That’s when we discovered that our electric cord wasn’t long enough to reach the receptacle — even with an additional 30-foot extension cord. We needed another 3 to 4 feet. 

We reconnected the truck to the trailer, and Bob scooched Tagalong’s tail closer to the outlet. The electric cord reached, and we were able to disconnect the truck and trailer and set up our home. 

In our debrief afterward, we realized we still need to work on our communication. Bob thought I was pointing at a bush when I tried to stop him from hitting the rebar. Instead of yelling “Stop!” through the walkie-talkie, my words could have been clearer, such as, “You’re x inches from hitting rebar on the driver side of the trailer.” We did both stay calm through it all, so that’s improvement.

Although we didn’t travel far, we appreciated the change of scenery — beautiful mountain views and desert landscape — as well as the quietness of being farther from the city. And the issues we encountered were easy fixes that Bob already repaired.

You might also like Our top RV lessons in 5 years of RV travel.